Subaru 2000 Legacy Owner's Manual page 164

B Heating
To direct warm air toward the floor:
1. Set the air inlet selection button to the "OFF" position
2 Set the air flow control dial to the "
3. Set the temperature control dial to the most comfortable level.
4. Set the fan speed control dial to the desired speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the "
B Bi-level heating
This setting allows you to direct air of different temperatures from the
4-8
" position.
" position.
HB5013AA
HB5014AA