Subaru 2000 Legacy Owner's Manual page 63

child should use eigher the vehicle's seatbelts or an approved af-
termarket booster seat, if necessary.
6. Press the removable pad against the hook and loop fasteners
(VelcroR) and install the pad to the seatback. Make sure the belts go
through the slots in the pad.
WARNING
If you remove the removable pad for cleaning or other purposes,
do not use the built-in child restraint. If an accident occurs, the
absence of the pad can increase the risk or severity of injury to
the child.
7. Sit the child on the child restraint.
Seat, seatbelt and SRS airbags
HBS051CB
HBS052BA
HBS050CB
HBS053BB
– CONTINUED –
1-43