Maintenance And Care - Rinnai RB-3011H-CB Operation & Installation Manual

"H" is turned off when the cooking zone temperature
drops below a present temperature.
Automatic switch off
This hob is equipped with a safety switch which
automatically switches off the cooking zones after they
have been in continuous operation at different power
levels.
Suppose the front cooking zone is set to level 8, the
cooking zone will switch off after 2 hours of continous
operation, while the back cooking zone set to level 2
will switch off after 6 hours of continuous operation.
Power levels Cooking zone switches off after
1, 2, 3
4, 5, 6
7, 8, 9
WARNING:
Disconnect the power supply cord before carrying out
any cleaning or maintenance activities.
Cleaning the appliance
The appliance should be cleaned regularly, preferably
after each use.
• Do not use abrasive or corrosive cleaning agents as
these may scratch the surface.
• Avoid using hard, abrasive brushes or sponges.
• Never use steam cleaners or presure cleaners on
the appliance.
• Clean the hob with a damp soft cloth using and
mild detergent or suitable ceramic and stainless
steeel hob cleaner. Do not apply cleaner when the
hob is still hot as this could result in marking on the
surface. Wipe dry with a soft dry cloth. Ensure that
all cleaner residues are removed as residues can
burn onto the appliance next time it is used and
8 hours
4 hours
2 hours

MAINTENANCE AND CARE

Useful Tip
• Always place cookware on the cooking zone before
switching on the appliance.
• Take care to keep the control panel clean and never
place the pans on the control panel sensors. The
electronic unit beneath it could be damaged.
could cause possible damage to the surface.
• To remove more stubborn dirt, or if any sugary
deposits are melted on the hob during cooking,
remove the spills as soon as possible with a special
scraper while the surface is still hot. Allow the
appliance to cool down, and then clean the hob as
described above.
• *Scraper for glass ceramic can be purchased from
specialized shops.
Useful Tips:
• Allow the appliance to cool down to room
temperature before cleaning. Use a soft cloth to
dry surfaces that have been cleaned with water to
avoid water marks.
• To avoid food or liquid residues forming deposits
on the appliance surface, remove stains or spills as
soon as possible without waiting for the appliance
to cool.
12