Operating Instructions - Rinnai RB-3011H-CB Operation & Installation Manual

Table of Contents

Advertisement

Switching ON/OFF the hob
The hob must be switched on before any of the cooking
zones can be used.
To switch on the hob, press ON/OFF key
signal' sounds and power indicator light is displayed
(on standby mode). If no function is selected within
1 minute after switching on, the hob automatically
switches itself off for safety reasons.
To switch off the hob, press the ON/OFF key
power indicator goes off.
Switching on the cooking zones
Each cooking zone is controlled by a cooking zone
selector and power level select key
To start operating a cooking zone, touch the
corresponding zone selector key (i.e.
Set the desired power level (between 0~9) for the
selected cooking zone using
default power level setting is level '5'.
Tips:
Power Sharing between cooking zones
(FOR RB-3012H-CB/ZB, RB-3022H-CB/ZB, RB-5022H-
CB/ZB, RB-7012H-CB/ZB, RB-7013H-CB/ZB ONLY)
For simultaneous cooking on two zones, we recommend
the use of cooking zones located on opposite sides of
the hob. If using several cooking zones on the same
time, the power management shares the maximum
available power between these cooking zones.
If only one cooking zone is powered on, it can be
utilized at its maximum power (level 9). As soon
as the other cooking zone is turned on, the power
management will not allow all zones to operate at full
power but will alternate power between the two or
three cooking zones. The change will be visible on the
displays. The last command given to a cooking zone
takes priority on the power setting.
Switching off the cooking zones
To switch off a cooking zone, use the corresponding
control key and progressively press the
the hob is switched off.
BOOST function
The power function makes more power available to the
induction cooking zones that can be used to temporally
boost the normal maximum power for a cook zone.
To use Boost function:
Press the zone selector key (i.e.
Press Boost key
, display will show 'P'.
(For RB-6014H-CB/ZB only, press
power level shows 9, then press

OPERATING INSTRUCTIONS

To cancel Boost function:
. A '
Note: The Power Boost function will only activate
for 5 minutes at most, after that the induction zone
automatically switches back to heat setting 9.
and
Child Lock function
The child lock function prevents unintentional changing
of settings. Any operation on the control functions will
not work until the hob is unlocked.
and
.
).
or
keys. The
except ON/OFF. You can always turn the hob off with
the ON/OFF key in an emergency, but you shall need to
unlock the hob first in the next operation.
Minute Minder:
You can use the timer as a minute minder while the
cooking zones do not operate
To operate:
Timer
Count Down Timer
Use the countdown timer to set how long you want the
cooking zone to operate
Set the countdown timer only after you have selected
key until
the cooking zone
when the cooking zones are active and the heat setting
is set
).
until the
again, the
10
boost function activate and display will show 'P'.)
Choose the zone under Boost (i.e.
Press the power select key
choose the level you want to set.
To activate, press the lock key
timer key shows 'Lo'.
To deactivate, press and hold the lock key
seconds. The 'Lo' goes off and hob is unlocked.
When the hob is in lock mode, all keys are disable
Turn on the hob, using the on/off key.
Press the timer key to operate this function
Press on the power level key selector to set the
time (00 to 99 minutes)
When the time has ended the buzzer will beep for
30 seconds and display will shows " - "
To deactivate the minute minder, press the timer
key to adjust the time to 00.
The selection of timer function is only possible
To set the cooking zone press on the corresponding
zone selector key (i.e.
timer.
To activate the countdown timer, press the timer
key
to operate this function
Press
or
of the power level key selector to
set the desired minutes (0 to 9). Press the timer
).
to cancel Boost, and
. The display on
for 3
)that you wish to set the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents