Electrical Connection ----------------------------------------------------------------------------------------------------------------------- 10 IMPORTANT Please paste the serial number labels enclosed with the packaging on your warranty card to register your product warranty. Please contact your local Rinnai Customer Care Centre should you require further assistance. Version: 2017 07...
SAFETY INSTRUCTIONS Please read this user manual thoroughly before attempting to use this appliance for the first time. This manual contains important information on safe installation, use and care of the appliance. Keep these instructions for reference and pass them on to future user. Unpacking spillovers may ignite.
TECHNICAL DATA Model RB-7022HE-CB Voltage 220-240V Frequency 50/60Hz No. of Cooking Zones Left: 1.1/2.2kW Power of Cooking Zones Right: 1.8/2.1kW Total Power 4300W Appliance Dimension 710*410*60mm Cut-out Dimension 680*380mm Model No. A(mm) B(mm) W(mm) D(mm) H(mm) X(mm) Y(mm) RB-7022HE-CB Measurements in mm.
GUIDE TO THE APPLIANCE RB-7022HE-CB 1. Dual radiant zone 1.1kW/2.2kW (Φ140/230mm) 2. Single induction zone 1.8kW/2.1kW (Φ210mm) 3. Control panel 1. ON/OFF key 2. Child lock 3. Power level indicator / Timer indicator 4. Power level selector ("+" to increase level) 5.
Page 7
Choosing suitable Cookware To obtain best results: Use cookware made from ferromagnetic materials • Cookware with thick flat bases should be chosen for which are compatible with induction. We recommend the benefit of uniform heat distribution. Avoid using cookware made from cast iron, steel or stainless steel cookware with rough or deformed based.
USING FOR THE FIRST TIME New appliances have a slight smell on first use. The Remove packaging material unpleasant odour that is often detected during initial Ensure that all packaging material is removed before use is caused by the burning of protective substances using the hob for the first time.
Page 9
seconds. The 'Lo' goes off and hob is unlocked. to 00. The indicator of the cooking zone goes off. When the hob is in lock mode, all keys are disable Safety feature except ON/OFF. You can always turn the hob off with Pan sensor (For induction zone only) the ON/OFF key in an emergency, but you shall need to Each cooking zone is equipped with a pan sensor.
Please restart if the induction hob cools down. WARNING: Do not disassemble the unit by yourself in case of any dangers. If the problem persists despite observing the above checks, please contact your local Rinnai Customer Care Center for assistance.
INSTALLATION INSTRUCTIONS CAUTION • This appliance shall only be serviced by authorized personnel. This appliance is to be installed only by an authorized person according to the current local regulations and in observation of the manufacturer’s instructions. • Incorrect installation, for which the manufacturer accepts no responsibility, may cause personal injury of damage.
Page 12
FASTENING THE COOKTOP Each cooktop is supplied with a set of tabs and screws to fasten it on units with a working surface from 3 to 4 cm deep. The kit includes 4 tabs A and 4 self-threading screws B (fig.
ELECTRICAL CONNECTION IMPORTANT: Installation must be carried out according to the manufacturer’s instructions. Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility. Before carrying out any work on the electrical section of the appliance, it must be disconnected from the mains. Connection to a good earth wiring system is absolutely essential.