Table of Contents
Advertisement
If no signal is detected for the displayed input,
•
the setting switches to the set input to which a
signal is input. Also, if no signal is present for
the displayed input when the power is turned
on or when the input is switched, the setting
switches to the set input to which a signal is
input. When signals are input to multiple set
inputs, the priority order as default (immediately
after power-on) is as follows: HDMI, DIGITAL
LINK, DVI-D1, DVI-D2, PC.
In the other case (When the input is switched
after power-on), the input displayed last takes
priority.
●
[Changing delay] is the function to prevent the
accidental input switch during a short period,
such as when the signal is interrupted due to the
frequency change for the input signal while [Input
detection] is operating.
If a signal is detected again within the set period
(sec.), the input is not switched.
●
[Input detection] may not operate correctly
depending on the image playback device.
●
[Input detection] may not operate correctly when
connected with the DIGITAL LINK daisy chain.
Failover/Failback
Automatically switches to the backup input video if an
interruption of video occurs.
[Input change mode]
[Off]:
Disables the Backup Input function.
Failover/Failback
Input change mode
[Quick]:
Promptly switches to the backup input (Failover)
or puts back to the original input (Failback) if an
interruption of video occurs.
The backup video signal needs to be in the same
format as the (main) input in use for viewing.
Upon switching to the backup input, the video and
audio adjustment values for the (main) input used
for viewing will be inherited.
Failover/Failback
Input change mode
Primary backup input
Secondary backup input
Auto switch back mode
Changing mode
Backup input change
Main input
Current input
Off
Quick
HDMI
DVI-D1
Disable
High speed
Active
DVI-D2
Main input
[Normal]:
Promptly switches to the backup input or puts
back to the original input if an interruption of video
occurs.
The backup video signal does not need to be in the
same format as the (main) input in use for viewing.
Upon switching to the backup input, the video and
audio adjustment values for the backup input will
be used.
■
[Input change mode]: [Quick]
Promptly switches to the backup input if an
interruption of video occurs, and enables switching
between digital (HDMI / DIGITAL LINK / DVI-D1 /
DVI-D2) inputs.
Note
●
The backup video signal needs to be in the same
format as the (main) input in use for viewing.
●
Upon switching to the backup input, the video and
audio adjustment values for the (main) input used for
viewing will be inherited.
●
This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
●
This function may not operate correctly depending on
the image playback device.
[Primary backup input]
Sets the first priority backup input.
[(None)] / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Secondary backup input]
Sets the second priority backup input.
[(None)] / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function. (Failback)
[Disable]:
Unreturned
[Enable]:
Returned
59
English
Advertisement
Table of Contents
