Table of Contents
Advertisement
Pin assignments and signal names for HDMI
Terminal
Pin No.
T.M.D.S Data2+
T.M.D.S Data2 Shield
T.M.D.S Data2-
T.M.D.S Data1+
T.M.D.S Data1 Shield
T.M.D.S Data1-
T.M.D.S Data0+
T.M.D.S Data0 Shield
T.M.D.S Data0-
T.M.D.S Clock+
T.M.D.S Clock Shield
T.M.D.S Clock-
SCL
SDA
Ground
+5V DC
Hot Plug Detect
Signal name
DisplayPort terminal connection
Note
●
Additional computer and cables shown are not
supplied with this set.
●
Only Dual Mode (DP++) is compatible with
DisplayPort terminal.
●
For audio, it is also possible to use AUDIO IN 1 /
AUDIO IN 2 terminal input.
(For [Audio input select] function, see page 76.)
DisplayPort cable (commercially available)
PC with DisplayPort output
Note
●
In connecting with PC which uses early chipsets
or graphic cards compatible with DisplayPort, if the
DisplayPort output of the PC is connected to this unit,
malfunction of this unit or the PC may occur. In that
case, turn the power of the unit or the PC off, and
then turn it on again.
When inputting DisplayPort output to this unit, it
is recommended to use the PC which the newest
Chipset and Graphics Cards are used.
21
English
Advertisement
Table of Contents
