Panasonic TH-55VF2HW Operating Instructions Manual page 85

Error response
Error message
"ERR1" : Undefined control
command
"ERR2" : Out of parameter
range
"ERR3" : Busy status or
reception invalid
period
"ERR4" : Timeout or reception
invalid period
"ERR5" : Wrong data length
4 bytes
2. When [LAN control protocol] is set
to [Protocol 2].
Last
terminal
Communicates with the same protocol as that of a
symbol
Panasonic projector
■
When the WEB control administrator
privileges password has been set (Protect
mode)
(CR)
Connection method
0x0d
1
Obtain the display's IP address and the port number
(Default is 1024), and request connection to the
display.
The IP address and the port number can be obtained
from the following menus.
IP address:
•
1 byte
[Setup] → [Network settings] → [LAN setup] or
[Network status]
Port number:
•
[Setup] → [Network settings] → [LAN setup]
●
For more detail of the settings, see page 68, 69.
2
The display responds.
Response data
Data part Space
[NTCONTROL]
(ASCII
character
string)
9 bytes
Mode: 1 = Protect mode
3
Hash the following data with the MD5 algorithm, and
generate a 32-byte hash value.
[xxxxxx:yyyyy:zzzzzzzz]
xxxxxx :
WEB control administrator privileges user name
yyyyy :
Above administrator privileges user password
●
Default user name and password are as follows:
User name: dispadmin
Password: @Panasonic
zzzzzzzz :
8-byte random number obtained in step 2
Mode Space
[ ] [1] [ ]
0x20 0x31 0x20
1 byte 1 byte 1 byte
Random Last
number terminal
part symbol
[zzzzzzzz]
(CR)
(ASCII
0x0d
code
hex
number)
8 bytes 1 byte
85
English