Table of Contents
Advertisement
Shipping condition
It is possible to reset the following data to the factory
settings.
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus and user image
registered in [Setup] - [Startup image settings]
Note
●
The setting for [Options] - [Long life settings] is not
reset to the factory setting with [Shipping].
■
Remote control
1
Press <SETUP> to display the [Setup]
menu.
2
Select [OSD language] with
and press <ENTER> for more than 3
seconds.
The following screen will be displayed.
Options
Display software information
Software licenses
Cloning password
USB data cloning
LAN data cloning
Shipping
3
Select [Shipping] with
<ENTER>.
Shipping
YES
4
Select [YES] with
<ENTER>.
The message [Shipping ( Wait a moment )] will be
displayed.
5
After the message [Please turn off
the power] is displayed, turn the
power off by switching the <Main
power switch> (
●
Or, disconnect the AC cord plug from the wall
outlet.
and press
NO
and press
/ ) OFF ( ).
■
Unit
1
Press <MENU (Unit)> for several
times and display the [Setup] menu.
2
Select [Menu display duration] with
, and then press and hold
<ENTER (Unit)> for more than 5
seconds.
3
Select [YES] with <- (Unit)> and press
<ENTER (Unit)>.
The message [Shipping ( Wait a moment )] will be
displayed.
4
After the message [Please turn off
the power] is displayed, turn the
power off by switching the <Main
power switch> (
●
Or, disconnect the AC cord plug from the wall
outlet.
/ ) OFF ( ).
English
115
Advertisement
Table of Contents
