Table of Contents
Advertisement
[Changing mode]
Select speed of input switching.
[High speed]:
If switching between the same signal formats, it is
possible to switch within 1 second.
If switching between the different signal formats,
picture noise may be caused.
[Normal speed]:
If switching between the same signal formats, it is
possible to switch within 2 seconds.
If switching between the different signal formats, it
takes 3 to 4 seconds to switch but picture noise is
not caused.
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
60
English
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI
DIGITAL LINK
DVI-D1
Backup
DVI-D2
PC
USB
○: S electable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI
16:9
Main input
Backup OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI
16:9
Backup Input
DVI
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
Main
HDMI
DIGITAL LINK
PC USB
DVI-D1
DVI-D2
○
×
×
×
×
×
×
×
×
Advertisement
Table of Contents
