Table of Contents
Advertisement
[Temperature warning]
When set to [On], the display sends out the warning
message.
Initialization
When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] (see page 54) settings,
set all the values [Off] so that all the buttons are enabled
again.
Press <- (Unit)> together with <RETURN>
and hold for more than 5 seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
YES
●
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].
To reset the setting of [Controller
user level] to default
When remote control buttons are disabled due to the
[Controller user level] (see page 78) setting, set the
value [Off] so that all the buttons are enabled again.
Press <SETUP> and hold for more than
5 seconds.
Setting for [Controller user level] will be back to [Off].
80
English
NO
Advertisement
Table of Contents
