Table of Contents
Advertisement
Shipping
Restores the data of this unit to the factory default state.
For more detail of the settings, see "Shipping condition".
(see page 115)
Audio input select
Set up the sound when a video input is selected.
1
Select the video input with
Set the audio input with
Audio input select
HDMI
DisplayPort
DIGITAL LINK
DVI-D1
DVI-D2
PC
●
The illustration above shows the factory settings.
Video input
HDMI
DisplayPort
DIGITAL LINK
DVI-D1 / DVI-D2 / PC
[No audio]: No audio input (Mute)
•
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
AUDIO1 IN
76
English
.
HDMI
DisplayPort
DIGITAL LINK
AUDIO1 IN
AUDIO1 IN
AUDIO1 IN
Audio input
HDMI / AUDIO1 IN /
AUDIO2 IN / No audio
DisplayPort / AUDIO1 IN /
AUDIO2 IN / No audio
DIGITAL LINK / AUDIO1 IN /
AUDIO2 IN / No audio
AUDIO1 IN / AUDIO2 IN /
No audio
HDMI
16:9
Long life settings
Long life settings
Long life mode
Auto brightness adjustment
[Long life mode]
Extends the panel life by reducing the backlight
.
brightness.
[On1]:
Reduces the backlight brightness by approx. 20
percent compared to its maximum.
[On2]:
Reduces the backlight brightness by approx. 40
percent compared to its maximum.
[Off]:
Does not reduce brightness.
[Auto brightness adjustment]
Corrects the brightness automatically for the brightness
change due to ageing caused by the panel illumination.
[On]:
Corrects automatically.
[Off]:
Does not correct automatically.
Note
●
This function can be set when the unit is turned on for
the first time. (see page 34)
In case it was not set, it is possible to set under this
menu.
●
When [Long life mode] is set to the item other than
[Off], [Backlight] in [Picture] menu will be greyed out
and cannot be set.
●
[Auto brightness adjustment] cannot be set to [On] if
the panel illumination time exceeds 1000 hours.
Onscreen display
Set to display / hide the following Onscreen display.
●
Power on display
●
Input signal switch display
●
No signal display
●
No external media display (at USB input)
●
MUTE display after displaying the menu screen
●
Off timer remaining time display when 3 minutes
remaining
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
Off
Off
Advertisement
Table of Contents
