Lan Mode - Panasonic K-NL408KT/G User Manual

5.2 LAN Mode

For the LAN mode, after you logged in, you can see the main window. See Figure 5-8.
This main window can be divided into the following sections.
Section 1: there are six function buttons: Preview, Setup (chapter 5.8), Info (Chapter 5.9), Playback

(chapter 5.10), Alarm (chapter 5.11), and Logout (chapter 5.12).
Section 2: There are monitor channels successfully connected to the NVR.

Please refer to Figure 5-4 for main stream and sub stream1 switch information.
Section 3: Start Talk button.

You can click this button to enable audio talk. Click 【▼】 to select bidirectional talk mode. There are four
options: DEFAULT，G711a，G711u and PCM. See Figure 5-5.
After you enable the bidirectional talk, the Start talk button becomes End Talk button and it becomes
green. Please note, if audio input port from the device to the client-end is using the first channel audio
input port. During the bidirectional talk process, system will not encode the audio data from the 1-channel.
Section 4: Instant record button. Click it, the button becomes green and system begins manual

record. See Figure 5-6. Click it again, system restores previous record mode.
Section 5: Local play button.

The Web can playback the saved (Extension name is dav) files in the PC-end. Click local play button,
system pops up the following interface for you to select local play file. See Figure 5-7.
Figure 5-4
Figure 5-5
Figure 5-6
158