Table of Contents
Advertisement
Tour Setup
In Figure 4-41, click tour tab.
Input tour value and preset No. Click Add Preset button to add current preset to the tour. See Figure 4-42.
Tips
Repeat the above steps to add more presets to the tour. Click Del Preset button to remove it from the tour.
Please note some protocols do not support delete preset function.
Pattern Setup
In Figure 4-41, click Pattern tab and input pattern number.
Click Start button to start direction operation. Or you can go back to Figure 4-39 to operate
zoom/focus/iris/direction operation.
In Figure 4-43, click End button.
Border Setup
In Figure 4-41, click Border tab.
Use direction buttons to set camera left limit and then click Left button.
Use direction buttons to set camera right limit and then click Right button. Now the scan setup process is
complete.
Figure 4-42
Figure 4-43
53
Advertisement
Table of Contents
