Table of Contents
Advertisement
Tour
PTZ
Activation
Snapshot
Video Matrix
5.8.3.1.2
Video Loss
The video loss interface is shown as in Figure 5-46.
Please note video loss does not support anti-dither, sensitivity, region setup. For rest setups, please refer
to chapter 5.8.3.1.1 motion detect for detailed information.
You need to click setup button to select tour channel. System
begins 1-wiindow or multiple-window tour display among the
channel(s) you set to record when an alarm occurs. See Figure
5-40.
Here you can set PTZ movement when alarm occurs. Such as go
to preset X. See Figure 5-39.
Click setup button to select snapshot channel. See Figure 5-41.
This function is for motion detect only. Check the box here to
enable video matrix function. Right now system supports
one-channel tour function. System takes "first come and first
serve" principle to deal with the activated tour. System will process
the new tour when a new alarm occurs after previous alarm ended.
Otherwise it restores the previous output status before the alarm
activation.
Figure 5-46
194
Advertisement
Table of Contents
