Panasonic K-NL408KT/G User Manual page 227

5.8.5.8 RS232
The RS232 interface is shown as in Figure 5-84.
Please refer to the following sheet for detailed information.
Parameter Function
Function
Baud Rate
Data Bit
Stop Bit
Parity
5.8.5.9 PTZ
The PTZ interface is shown as in Figure 5-85 (Local) and Figure 5-86 (Remote).
Before setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is right.

Decoder A (B) line connects with NVR A (B) line.

Click Save button after you complete setup, you can go back to the monitor interface to control speed
dome.
Figure 5-83
Figure 5-84
Select the corresponding dome protocol.
Default setup is console.
Select the baud rate.
Default setup is 115200.
The value ranges from 5 to 8.
Default setup is 8.
There are two options: 1/2.
Default setup is 1.
There are five options: none/odd/even/space/mark.
Default setup is none.
221