Record And Snapshot; Encode - Panasonic K-NL408KT/G User Manual

Record and Snapshot

4.7
The record/snapshot priority is: ALARM->MOTION DETECT->SCHEDULE.
4.7.1

ENCODE

4.7.1.1 Encode
Encode setting is to set IPC encode mode, resolution, bit stream type and etc
From Main menu->SETTING->REMOTE->ENCODE, you can see the following interface. See Figure
4-46.
Channel: Select the channel you want.

Code-Stream Type: Please select from the dropdown list. There are some options: regular/motion

detect/alarm. You can set the various encode parameters for different record types.
Compression: System supports H.265, H.264, MJPEG.

Resolution: The mainstream resolution type is IPC's encoding config. Generally there is

D1/720P/1080P.
Frame Rate: It ranges from 1fps to 30fps in NTSC mode and 1fps to 25fps in PAL mode.

Bit Rate Type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality.

Bit Rate：You can select bitrate value in the combo box.

Audio/Video: You can enable or disable the video/audio. Please note, once you enable audio

function for one channel, system may enable audio function of the rest channels by default.
Copy：After you complete the setup, you can click Copy button to copy current setup to other

channel(s). You can see an interface is shown as in Figure 4-47 You can see current channel
number is gray. Please check the number to select the channel or you can check the box ALL.
Please click the OK button in Figure 4-47 and Figure 4-46 respectively to complete the setup.
Please note, once you check the All box, you set same encode setup for all channels. Audio/video
enable box, overlay button and the copy button is shield.
Please highlight icon
Figure 4-45
to select the corresponding function.
55