Panasonic K-NL408KT/G User Manual page 187

The connection interface is shown as in Figure 5-30.
Please refer to the following sheet for detailed information.
Parameter
Max Connection
TCP Port
UDP Port
HTTP Port
HTTPS
RTSP Port
5.8.2.4 PPPoE
The PPPoE interface is shown as in Figure 5-31.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the
IP address column.
Please note, you need to use previous IP address in the LAN to login the device. Please go to the
IP address item to via the device current device information. You can access the client-end via
this new address.
Figure 5-30
Function
It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
The default value is 37777. You can input the actual port
number if necessary.
The default value is 37778. You can input the actual port
number if necessary.
The default value is 80. You can input the actual port number if
necessary.
The default value is 443. You can input the actual port number if
necessary.
The default value is 554.
181