selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 4-29.
Icon
4.6.2.1 PTZ Function Setup
Click
, you can go to the following interface to set preset, tour, pattern, and scan. See Figure 4-41-1.
Preset Setup
In Figure 4-41, click Preset tab and use eight direction arrows to adjust camera to the proper position.
The interface is shown as in Figure 4-41-1.
Click Set button and then input preset number.
Click Set button to save current preset.
Function
Icon
Preset
Tour
Pattern
Autoscan
AutoPan
Figure 4-41-1
Figure 4-41-1
52
Function
Flip
Reset
Aux Config
Aux on-off button
Enter menu