Table of Contents
Advertisement
Theft-Deterrent Arming Verification
Your vehicle comes with this feature set
in Mode 3. To
change the factory setting, do the following:
1. Press the LOCK button on the remote keyless
entry transmitter.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for.
3. Press the LOCK button on the remote keyless entry
transmitter until you hear the number
of chimes that
corresponds to the mode selection you want.
Mode
1: All Off (No horn chrrps or parking lamp flash.)
Mode
2 : Horn and Lamps (Your parking lamps will
flash and your horn will chirp twice to verify the system
is armed using any arming method.)
Mode 3: Horn and LampsLamps (If you use the remote
keyless entry transmitter to arm the system, your
parking lamps will flash and your horn will
chup twice
to verify that the system is armed. If it only c h q s once,
the hatch is open or unlatched.
If you use either
the
power door lock switch or passive arming, only your
lamps will flash for verification.)
Mode 4: Lamps (When your vehicle
a r m s ,
only your
parking lamps will flash for verification.)
Driver's Door Alarm Delay and Shock
Sensor Enable
Your vehicle comes with this feature set in Mode 4. To
change the factory setting, do the following:
1. Turn the parking lamps on and off.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for.
3. Turn the parking lamps on and off until you hear the
number of chimes that corresponds to the mode
selection you want.
Mode 1: Zero Delay and Shock Sensor Disabled (The
alarm
will sound immediately
if
the driver's door is
opened with your key and the shock sensor will not be
available to measure sharp blows to your vehicle.)
Mode
2 : Eight-Second Delay and Shock Sensor
Disabled (The alarm will sound eight seconds after
the
driver's door is opened with your key and the shock
sensor will not be available to measure sharp blows
to
your vehicle.)
2-22
Advertisement
Table of Contents
