Table of Contents
Advertisement
Battery Replacement
Under normal use, the battery in
your remote keyless
entry transmitter should last about two years.
You can tell the battery is weak if the transmitter won't
work at the normal range in
any
location.
If you
have
to
get close to your vehicle before the transmitter works,
it's probably time to change the battery.
Use one battery, type CR2032, or a similar type.
NOTICE:
When replacing the battery, use care not to touch
any of the circuitry. Static from your body
transferred to these surfaces may damage
the transmitter.
To replace the battery in the remote keyless
entry transmitter:
1. Carefully pry o f f the cover by inserting a dime
(or similar object) in the slot between
the covers
and twist.
2. Lift off the back cover.
3. Remove and replace the battery. Use one battery,
type CR2032, or a similar type. Put the new battery
in printed side down.
4. Replace the back cover. Make sure the cover is on
5. Check the transmitter operation.
If the transmitter
tightly so water won't get in.
does not work after battery replacement, it may need
to be resynchronized or matched to your vehicle. See
"Synchronization" in the Index.
2-10
Advertisement
Table of Contents
