5. Then fill the coolant recovery tank to FULL COLD.
6 . Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap off.
I
7.
8.
Start the engine and let
it
run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
By
this
time, the coolant level inside the filler neck may
he lower. If the level is lower, add more of the proper
DEX-COOL@ coolant mixture through the filler neck
until the level reaches the base of the filler neck.
r
9.
Then replace the pressure cap.
At
any time during
this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.