Table of Contents
Advertisement
After the
inboard edge
of the
panel
is
in position under
the center roof rail, lower the outboard edge of the panel
into position, close the latch and lock the T-top.
NOTICE:
Do not attempt to install the panels by sliding
them horizontally toward the center roof rail.
Doing so may cause the weatherstrips to be
aligned improperly, which may result in leaks
and possible damage to the weatherstrips.
NOTICE:
High pressure car washes may cause water to
enter your vehicle. Never spray water directly at
the roof panel joints. This will cause leaks.
2-66
Advertisement
Table of Contents
