Table of Contents
Advertisement
Fault correction
Fault
Battery indicator on the
operating module does
not light up after the
switch-on.
The battery gauge blinks
after the switch-on.
40
Cause
Operating module defec-
tive
Plug connection of the
power
supply
contact.
Batteries deep discharged.
The selection lever drive-/
push mode is set to push
mode.
The joystick moved too
early.
Plug connection at one of
the drives without contact.
Malfunction in the elec-
tronics.
Not listed faults.
Remedy
Have it repaired by the
specialist workshop
Check the plug connec-
without
tions.
Have it repaired by the
specialist workshop.
Swivel the selection le-
ver drive- / push mode to
drive mode.
Switch the electric travel-
ling wheelchair off and on
again.
Check the plug connec-
tions.
Have it repaired by the
specialist workshop.
View chapter Error diagno-
stics on page 41.
Advertisement
Table of Contents
