Fault Correction - Meyra Oprtimus 2 Operating Manual

Fault correction

Fault
LED/LCD-display of the
operating module is not lit
after switching it on.
Electric wheelchair does
not move forward.
Error code display
Lighting not active.
Cause
Main-/battery fuse is de-
fective or not correctly in-
serted.
Plug connection of the
power supply
contact.
The selection lever drive-/
push mode is set to push
mode.
Plugged connection on
the drive misses contact.
Batteries or power supply
defective.
Observe the operating
manual < operating mod-
ule >.
Filament bulb defective.
Lighting fuse or drive elec-
tronics defective.
Remedy
Replace defective fuse or
clean contacts and insert
correctly.
Check the plug connec-
without tions.
Move the selection lever
for the drive/push mode
into the drive mode posi-
tion and make sure it clicks
into place.
Have the fault corrected by
a specialist workshop.
Have the fault corrected by
a specialist workshop.
View < Error diagnostics >
in the operating manual
for the operating module.
Replace defective filament
bulb.
Let it be repaired or re-
placed by a specialist
workshop.
39