Memory Functions - Mercedes-Benz 2011 CL-Class Operator's Manual

Cl-class
Table of Contents

Advertisement

Memory functions

102
X
Make sure that the vehicle is stationary and
that the SmartKey is in position 2 in the
ignition lock.
X
Press button = for the exterior mirror on
the front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use adjustment button ; to adjust the
exterior mirror to a position which allows
you to see the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
i
You can also store the parking position
using memory button M :.
X
With the SmartKey in position 2 in the
ignition lock and with the exterior
mirror on the front-passenger side
activated, use adjustment button ; to
set the exterior mirror such that the
rear wheel and curb are visible.
X
Press memory button M : and one of
the arrows on adjustment button ;
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Adjust the exterior mirror on the front-
passenger side with the corresponding
button (
Y
page 100).
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 6 mph
R
(10 km/h)
about ten seconds after you have
R
disengaged reverse gear
if you press button ? for the exterior
R
mirror on the driver's side
Memory functions
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
seat, backrest, head restraint position and
R
contour of the backrest in the lumbar
region
active multicontour seat: activated/
R
deactivated
multicontour seat: the side bolsters of the
R
seat cushion and the backrest as well as
the contour of the backrest in the lumbar
and shoulder regions
driver's side: steering wheel position
R
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
G
Warning
Do not activate the memory function while
driving. Activating the memory function while

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 600Cl 550 4maticCl 63 amgCl 65 amg

Table of Contents