Driving Systems; Distronic Plus - Mercedes-Benz 2011 CL-Class Operator's Manual

Setting a speed
G
Warning
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/
or serious injury to you and others.
X
Press the cruise control lever to the
pressure point, up : for a higher speed or
down ; for a lower speed.
X
Keep the cruise control lever pressed until
the desired speed is reached.
X
Release the cruise control lever.
The new speed is stored.
i Cruise control is not deactivated if you
depress the accelerator pedal. For
example, if you accelerate briefly to
overtake, cruise control adjusts the
vehicle's speed to the last speed stored
after you have finished overtaking.
Setting in 1 mph (Canada: 1 km/h)
increments
X
Briefly press the cruise control lever to the
pressure point, up : for a higher speed or
down ; for a lower speed.
The last speed stored is increased or
reduced.
Setting in 5 mph (Canada: 10 km/h)
increments
X
Briefly press the cruise control lever
beyond the pressure point, up : for a
higher speed or down ; for a lower speed.
The last speed stored is increased or
reduced.
Deactivating cruise control
There are several ways to deactivate cruise
control:
X
Briefly press the cruise control lever
forwards =.
or
X
Brake.
Cruise control is automatically deactivated if:
you engage the electric parking brake.
R
you are driving below 20 mph (30 km/h).
R
®
ESP intervenes or you deactivate ESP
R
you shift the transmission to position N
R
while driving.
If cruise control is deactivated, you will hear
a warning tone. You will see the
control off
message in the multifunction
display for approximately five seconds.
i The last speed stored is cleared when you
switch off the engine.

DISTRONIC PLUS

Important safety notes
DISTRONIC PLUS regulates the speed and
automatically helps you maintain the
distance to the vehicle detected in front. It
brakes automatically in order to avoid
exceeding the set speed.
On long and steep downhill gradients,
especially if the vehicle is laden, you must
select shift range 1, 2 or 3 in good time. By
doing so, you will make use of the braking
effect of the engine, which relieves the load
on the brake system and prevents the brakes
from overheating and wearing too quickly.
If a slower-moving vehicle is detected in front,
DISTRONIC PLUS causes your vehicle to
brake and maintain a preset distance to the
vehicle in front.
G
Warning!
The DISTRONIC PLUS requires familiarity with
its operational characteristics. We strongly

Driving systems

®
Cruise
293
.
Z