General Information; Settings; Deleting - Mercedes-Benz 2011 CL-Class Operator's Manual

System settings
132
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
stored automatically.
Canceling the first or second part of
individualization
X
Cancel
Confirm
COMAND controller.
A prompt appears asking whether you
really wish to cancel.
X
Yes
Select or
If you select Yes, individualization will be
canceled. The data from the part canceled
is not stored.
If you select No, the current part begins
again.
Deleting existing individualization data
X
Vehicle
Select
COMAND controller and press W to
confirm.
X
System
Select
X
Voice Control
Select
confirm.
X
Delete individualization
Select
press W to confirm.
A prompt appears asking whether you
really wish to delete.
X
Yes
Select or
If you select No, the process will be aborted.
If you select Yes, the individualization is
deleted. You will see a message to this
effect.
by pressing W the
No
and press W to confirm.
by turning cVd the
and press W to confirm.
and press W to
No
and press W to confirm.
®
Bluetooth
General information about Bluetooth
®
Bluetooth technology is the standard for
short-range wireless data transmission of up
to approximately 10 meters. Bluetooth
allows, for example, the exchange of vCards.
®
Bluetooth is a registered trademark of
Bluetooth Special Interest Group (SIG) Inc.
Requirements for a Bluetooth
connection
You can connect mobile phones and
notebooks with COMAND.
To do so, the following conditions need to be
met:
®
Bluetooth
R
phones, must comply with a certain profile
in order to be connected to COMAND.
Every Bluetooth
specific Bluetooth
®
Bluetooth
R
and on the respective Bluetooth
see the separate operating instructions.
the Bluetooth
R
COMAND in order for COMAND to find and
display it. For the setting procedures,
please see the operating instructions for
and
the Bluetooth
i Once a mobile phone has been
connected, reception and transmission
volume may change.

settings

®
-capable devices, e.g. mobile
®
device has its own
®
name.
must be activated in COMAND
®
device must be "visible" to
®
device.
®
®
®
device;