Setting - Mercedes-Benz 2011 CL-Class Operator's Manual

System settings
128
dts™
MLP™
Selecting settings for the Bang & Olufsen
sound system
Calling up the selection menu
X
Select Sound.
X
Highlight Bang&Olufsen.
X
Press W.
A selection menu appears.
A # dot in front of an entry indicates the
current setting.
Selecting the setting for True Image™
X
Turn cVd or slide ZVÆ and highlight
reference
or
X
Press W.
Selecting sound mode
X
Sound Mode
Select
X
Turn cVd or slide ZVÆ and highlight left,
all or right.
X
Press W.
X
To exit the menu: press the % back
button beside the COMAND controller.
or
X
Slide XVY.
i Please bear the following in mind:
3D sound.
in the selection menu.
You will achieve the best sound results on
your Bang & Olufsen sound system by
playing high-quality audio DVDs and CDs.
MP3 tracks should have a bit rate of at least
224 kbit/s.
When playing using an iPod
should also be at least 224 kbit/s.
For optimum playback quality:
X
Deactivate the
®
iPod .
Surround-sound playback does not
function for mono signal sources, such as
the medium wave range (MW) in radio
mode.
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
System settings
Vehicle equipment
i These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time of purchase.
Please note that your vehicle may not be
equipped with all features described.
Display settings
Switching the display on/off
X
Select Vehicle by turning cVd the
COMAND controller and press W to
confirm.
X
Display off
Select
COMAND controller and press W to
confirm.
X
To switch on the display: press W or
cVd turn the COMAND controller.
®
, the bit rate
EQ
setting on the
by turning cVd the