Memory Functions - Mercedes-Benz E 2008 Series Owner's Manual

mkalafa,
Make sure that parking position for the
X
exterior mirror on the front-passenger side
is stored with the memory function
( page 94).
Y
Make sure that the key is in position 2 in
X
the ignition lock.
Make sure that button 2
X
mirror on the front-passenger side is
pressed in.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of
R
10 km/h
about ten seconds after you have disen-
R
gaged reverse gear
if you press button 1 for the exterior mir-
R
ror on the driver's side
* optional
Version: 2.9.4

Memory functions*

Storing settings
You can store up to three different settings
using the memory button.
The following settings are stored as a single
memory preset:
for the exterior
Position of the seat, backrest and head
R
restraint
Dynamic driving seat*: activated/deacti-
R
vated
Driver's side: steering-wheel position
R
Driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
G Risk of injury
The memory function can be used when the
key has been removed. For this reason,
children should never be left unsupervised
in the vehicle. They could otherwise
become trapped when moving the seat or
the steering wheel.
G Risk of accident
Only use the memory function on the
driver's side when the vehicle is stationary.
You could otherwise be distracted from the
Memory functions*
traffic conditions by the steering wheel and
seat moving of their own accord, and cause
an accident.
Storage position switches 1, 2, 3
1
Memory button M
2
Adjust the seat ( page 77).
X
Y
On the driver's side, also adjust the steer-
X
ing wheel ( page 89) and the mirrors
Y
( page 91).
Y
Press memory button M 2.
X
Press one of storage position switches 1,
X
2 or 3 1 within three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Controls
Z
93