Dvd Playback Conditions; Video Dvd Mode - Mercedes-Benz 2011 CL-Class Operator's Manual

Video
224

DVD playback conditions

If video DVDs do not correspond to the NTSC
or PAL TV playback standards, there may be
picture/sound interference or other playback
problems.
COMAND can play back video DVDs
produced according to the following
standards:
region code 1 or region code 0 (no region
R
code)
i If you insert a video DVD with a different
region code, you will see a message to this
effect.
PAL or NTSC standard
R
You will generally find the relevant details
either on the DVD itself or on the DVD case.
i COMAND is set to region code 1 at the
factory. This setting can be changed at an
authorized Mercedes-Benz Center. This will
allow you to play video DVDs with a
different region code, provided that they
are produced in accordance with the PAL
or NTSC standard. The region code can be
changed a maximum of five times.
Function restrictions
Depending on the DVD, it is possible that
certain functions or actions will be
temporarily blocked or may not function at all.
As soon as you try to activate these functions
or actions, you will see the K symbol in the
display.
Inserting and removing DVDs
X
Proceed as described in the "Inserting and
ejecting CDs and DVDs" section
( Y page 204).
Activating video DVD mode
Option 1
X
Insert a video DVD.
COMAND loads the medium inserted and
starts to play it.
Option 2
X
Video
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Video DVD mode is switched on.
Hiding/showing the control menu
X
To show: turn cVd or slide ZVÆ the
COMAND controller.
i This function is not available while the
DVD's own menu (
displayed.
X
To hide: slide ZVÆ the COMAND
controller.
or
X
Wait for approximately eight seconds.
Control menu displayed
Date medium type
:
Current track
;
Current scene
=
Track time
?
To show the menu
A
Y page 227) is being