Picture Settings - Mercedes-Benz 2011 CL-Class Operator's Manual

Basic settings

Picture settings

Adjusting the brightness, contrast or
color
X
Press W the COMAND controller to show
the menu.
X
Video
Select by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Select DVD-V and press W to confirm.
X
Select Brightness,
turning cVd the COMAND controller and
press W to confirm.
Changing the picture format
X
Press W the COMAND controller to show
the menu.
X
Video
Select by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Video DVD
Select and press W to confirm.
X
DVD-V
Select and press W to confirm.
The DVD-V menu appears. The ä dot in
front of a menu item indicates the current
setting.
X
16:9 optimized,
Select
Widescreen
and press W to confirm.
X
Select a setting by turning cVd the
COMAND controller and press W to
confirm.
DVD video mode
Safety notes
G
Warning!
COMAND is classified as a Class 1 laser
product. You must not open the casing. If you
open the casing, or if the casing is faulty or
damaged, there is a risk of exposure to
Contrast color
or by
4:3
or
invisible laser radiation. This may damage
your eyes, or those of others.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians.
G
Warning!
Only when the vehicle is stationary should
you:
load a disc
R
eject a disc
R
There is a risk of being distracted from the
road and traffic conditions if this is done while
the vehicle is in motion.
Notes about discs
There may be playback problems when
playing copied discs. There are a large variety
of discs, DVD authoring software, writing
software and writers available. This variety
means that there is no guarantee that the
system will be able to play discs that you have
copied yourself.
! Do not affix stickers or labels to the discs,
as they could peel off and damage
COMAND. Stickers can cause the disc to
bend, which can result in read errors and
disc recognition problems.
! COMAND is designed to accommodate
discs which comply with the EN 60908
standard. You can therefore only use discs
with a maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and can damage
COMAND.
Use round discs with a diameter of 12 cm.
Do not use discs with a diameter of 8 cm,
even with an adapter.
Video
223
Z