Table of Contents
Advertisement
9. Touch the HOME
the function.
10. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
11. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
12. In case of grease residues use specific
oven cleaning products.
13. Remove the residual water inside the
oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan-assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
We recommend removing the
door in order to make the manual
cleaning of the parts that are
difficult to reach easier.
Cleaning and maintenance
button to exit from
Pyrolytic: automatic oven cavity cleaning
(on some models only)
Pyrolytic cleaning is an automatic,
high-temperature cleaning
procedure that causes dirt to
dissolve. Thanks to this process, it is
possible to clean the inside of the
oven very easily.
Improper use
Risk of injury
• When this function is in use, the surfaces
could reach temperatures that are
higher than usual.
• Keep children at a safe distance.
Improper use
Risk of damage to surfaces
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following
the usual cleaning instructions.
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Completely remove all accessories from
inside the oven.
81
Advertisement
Table of Contents
