Smeg SFPA9305SPX Manual page 16

START
REPLAY
STOP
SAVE
DELETE
DOOR LOCK
RAPID PRE-HEATING
PROBE (if fitted)
Press and hold the HOME
button for a few seconds to stop
cooking immediately at any time
and return to the main menu.
To be able to start any cooking function, the
current time must be set.
2. Touch the flashing
access the SET THE TIME submenu.
3. Scroll up and down through the hours
and minutes to set the current time.
18
Use
Connectivity (on some models only)
Connectivity requirements:
• Smartphone or tablet running iOS
version 10.x or later or Android
version 5.1 or later.
• Wi-Fi network (2.4 GHz band, WPA2
protected setup) active and available in
the place where the appliance is
installed.
• Internet connection.
• Name and password of the home Wi-Fi
network or WPS mode (Wi-Fi Protected
Setup) available.
For further information, please refer to the
"Built-in oven connectivity manual".
First use
To switch on the appliance:
1. Connect the appliance to the mains
power supply.
The manufacturer's logo will appear for a few
seconds on the display
Then the current time display will appear
with the time field
symbol to
The following instructions are also
valid in the case of a prolonged
power failure.
After the appliance is switched on,
you will need to wait a few
seconds before you can use it.
.
flashing.