Table of Contents
Advertisement
Demo Mode (for showrooms only)
The same as Showroom, when this
mode is activated, after a certain
period of inactivity, a
demonstration of the various
screens that illustrate the potential
of the appliance is shown on the
display.
1. Select
Demo Mode.
2. Select On.
3. Touch the CONFIRM
activate Demo Mode.
To use the appliance normally, set
this mode to Off.
72
Use
1. Select
2. Select On.
3. Touch the CONFIRM
button to
Time display
Enables/disables the clock
display when the oven is switched
off.
Show the time.
activate the time display.
The Show the time function is
factory set to Off.
If the Show the time function is set
to On, when the appliance is in
standby it displays the current time
at low brightness.
When the Show the time function
is set to On, the appliance
consumes more energy than in
stand-by mode.
Only for SmegConnect models: If
the Show the time function is set to
Off the connectivity switches off
automatically when the clock goes
into stand-by.
button to
Advertisement
Table of Contents
