Mini Frame Storage Configuration - JBL VTX Series Rigging Manual

13.2 MINI FRAME STORAGE CONFIGURA TION
The Mini Frame can be disassembled and pinned together in a small and compact package for storage and transportation. Follow the
instructions below to set the Mini Frame in storage mode.
STEPS:
• First, pin the two side arms together using the four quick release pins connected to the side arms. It is not important which
1
storage holes are used for the pins, as this is just for storage.
• With the two side arms pinned together, use hole positions 1 and 22 to pin the spreader bar onto the side arms.
2
SMALLER 1/4" PINS
SMALLER 3/8" PINS
65
VTX A8 | Rigging Manual