Ground Stacking Using The Vt-Top - JBL VTX Series Rigging Manual

7.6 GROUND ST ACKING USING THE VT -TOP
The VT-TOP can be used to create small ground-stacked arrays of one to three VTX A8 cabinets. This can be especially useful when
small A8 arrays are used in applications such as front fill or auxiliary arrays. In this configuration, the VT-TOP and A8 cabinets are placed
upside down and the VT-TOP is used as the base of the ground stacked array. The A8 cabinet connected to the VT-TOP is fixed to a
-15-degree angle; cabinets above that can be adjusted to meet coverage needs. Stacks using the VT-TOP can be placed on a flat sur-
face such as the edge of a stage or ground-stacked subwoofers (like the G28).
STEPS:
• Remove the VT-TOP from a stack of A8 cabinets and place it upside down on the ground.
1
• Set the angle of the first A8 cabinet to the 10-degree position and place it upside down onto the VT-TOP.
2
• Use the two VT-TOP quick release pins on each side of the cabinet to secure the A8 onto the VT-TOP.
3
• Repeat until the array has been assembled.
4
1
2
4
3
26
VTX A8 | Rigging Manual