JBL VTX Series Rigging Manual page 21

STEPS:
• Lower the next A8 cabinet onto the first enclosure, making sure all four corners are aligned and the rigging arms engaged.
1
• Use the two quick release pins on each side to secure the cabinet to the A8 cabinet below it.
2
• Set the cabinet angle to the 10-degree (STORAGE) position and make sure the red locking lever is in the locked position.
3
• Repeat this process until all four cabinets are secured on the VTX A8 VT.
4
2
VTX A8 | Rigging Manual
3
21
1
4