10 - DISASSEMBLING AN A8 ARRA Y
10.1 OPEN THE ANGLE LOCKS AND A TT ACH THE VT
STEPS:
•
Safely lower the entire array to a workable height.
1
•
Press the Release Buttons on all four lower cabinets to unlock the rigging mechanisms. This enables the bottom four cabinets
2
to collapse back to the 10-degree position once the array is lowered to the ground.
•
Attach the VT to the bottom cabinet. Connect the two points at either the front or rear, then lift the other side of the VT and
3
attach the other two points.
1
VTX A8 | Rigging Manual
2
46
3