9.4 A TT ACH THE NEXT ST ACK
STEPS:
•
Raise the suspended cluster of VTX A8 cabinets and align the next cart of cabinets below the suspended cluster.
1
•
Once the clusters are aligned, carefully lower the suspended cluster until the front attachment points are nearly touching.
2
Check that the attachment points are aligned, then lower the suspended cluster until the front attachment points join together.
Insert the two front quick release pins.
CAUTION:
•
Always confirm that each cabinet is pinned to the same angle on both sides of the enclosure .
•
The top cabinet in each array should be pinned in accordance with the Array Frame and Extension Bar posi-
tioning instructions in section 8 .3 .
VTX A8 | Rigging Manual
42
2