Rigging The Array; Mixed Array Safety Note - JBL VTX Series Rigging Manual

VTX A8 | Rigging Manual
11.3 DE-RIGGING THE ARRA Y
The steps to de-rig a mixed array are the same as for a standalone A8 array. Follow the steps in chapter 10 – Disassembling an A8 Array
to safely de-rig the array.
11.4 MIXED ARRA Y SAFETY NOTE
To create a rigid and secure structure when building mixed arrays with A8 and B18 cabinets, each cabinet should always use all four
of the connection points corresponding to the points connecting the array to the array frame. It is recommended that all six connection
points of the B18s be used at all times, even though only four are under load in this situation. For additional B18 configurations and
safety recommendations, refer to the B18 Rigging Manual.
55