9 - DEPLOYING ST ANDALONE A8 SYSTEMS
Suspending standalone VTX A8 arrays is a simple and straightforward process. Carefully follow the steps below to correctly and safely
suspend an array. Instructions on suspending mixed A8/B18 arrays can be found later in this document.
9.1 PRESELECT THE ANGLES
STEPS:
•
Using the quick release pins (QRPs) located on the Angle Selection Panels, select the desired inter-enclosure splay angles for
1
all cabinets. For each enclosure, move the QRP from its 10-degree storage position to the desired position, as indicated on
the label. If the desired angle is 10 degrees, the QRP does not need to be moved.
ANGLE SELECTION PANEL
2.5°
3°
4°
6°
STORAGE
10°
2°
1.5°
1°
8°
1
25°
VTX A8 | Rigging Manual
39
Pin Position: 4°