3.
4.
Pull the bulb
straight out of the
socket.
Put a new bulb
into the socket
and push it in
until it is tight.
5.
Put the socket back into the side marker assembly and turn it to the
6. Replace the parkinghrn signal light assembly and tighten the screws.
right to tighten it.
Roof Marker Lights
1.
2.
Remove the
screws and lift off
the lens.
Pull the bulb
straight out of the
socket.
3. Put a new bulb into the socket and push it in until it is tight.
4. Redace the lens and tighten the screws.
6-54