Headlights And Vehicle Lighting - GMC 1994 Yukon Owner's Manual

Headlights and Vehicle Lighting
. .
Push the left side of the switch with the parking lights symbol on it to turn
on:
0
Parking Lights
0
Sidemarker Lights
0
Clearance Lights (if you have them)
0
Taillights
License Plate Lights
0
Instrument Panel Lights
0
Transfer Case Shift Indicator Light (if you have one)
Push the left side of the switch with the master lighting symbol on it to turn
on all the lights listed above as well as the headlights.
Push the right side of the switch with the off symbol on it
to
turn off your
lights.
Turn the dial at the right of the off switch to adjust instrument panel lights.
Turning the dial all the way up until it clicks turns on the interior lights.
You can switch your headlights from high to low beam by pulling on the
turn signal/high beam lever.
A circuit breaker protects your headlights. If you have an electrical
overload, your headlights will flicker on and off. Have your headlight
wiring checked right away if this happens.
2-47