Control System - Crestron TSW-760 Product Manual

Control System

Click Control System to configure a connection to a Crestron control system.
NOTE: The Control System accordion is shown in user project mode only.
Settings Tab - Control System
Encrypt Connection: Turn on the toggle to use an encrypted connection to the control
l
system.
Username: If Encrypt Connection is turned on, enter a username for the encrypted
l
connection.
Password: If Encrypt Connection is turned on, enter a password for the encrypted
l
connection.
Confirm Password: Reenter the password set for Control System Password.
l
IP Table: Set an IP table connection between touch screen and control system:
l
IP ID: Enter an IP ID for connecting the touch screen to the control system.
o
IP Address/Hostname: Enter the control system IP address or hostname.
o
Room ID: Enter a room ID to associate with the touch screen (for connections with
o
the Crestron Virtual Control server-based control system)
NOTE: For more information on connecting the touch screen to Crestron Virtual Control,
refer to the help file in the Crestron Virtual Control web configuration interface. To
access the help file, click the question mark button
56 • TSW-560, TSW-760, and TSW-1060
on the top left of the page.
Product Manual — Doc. 7927M