Crestron TSW-760 Product Manual page 46

Time Synchronization
l
Enable Time Synchronization: Turn on the toggle to use time synchronization via
o
SNTP (Simple Network Time Protocol).
Synchronize Now: With Enable Time Synchronization turned on, click Synchronize
o
Now to synchronize the touch screen with the SNTP server(s) entered in the
TimeServers table.
TimeServers: With Enable Time Synchronization turned on, use the provided table to
o
enter information regarding the SNTP server(s) used to synchronize the date and
time for the touch screen.
Click Add to add a new SNTP server entry into the table.
n
Enter the following information for each entry:
n
To remove an entry, fill the checkbox to the left of the table entry, and then
n
click Delete.
Time Configuration
l
Time Zone: Select a time zone for the touch screen using the drop-down menu.
o
Time(24hr Format): Select the time for the touch screen (in 24-hour format) using
o
the pop-up menu that is displayed.
Date: Select the date for the touch screen using the pop-up calendar that is
o
displayed.
42 • TSW-560, TSW-760, and TSW-1060
Enter the SNTP server address into the Address text field.
n
Enter the SNTP server port into the Port text field.
n
Use the Authentication Method drop-down menu to select the
n
authentication method used to access the SNTP server (if one exists).
If an authentication method is selected, enter the key used to
n
authenticate against the SNTP server into the Authentication Key text
field.
If an authentication method is selected, enter the ID for the key used to
n
authenticate against the SNTP server into the Key ID text field.
Product Manual — Doc. 7927M