Enter Standby; Save Changes; Revert; Upload User Project - Crestron TSW-760 Product Manual

Enter Standby

Click Enter Standby to force the touch screen to enter standby mode.

Save Changes

Click Save Changes to save any changes made to the configuration settings.

Revert

Click Revert to revert the touch screen back to the last saved configuration settings.

Upload User Project

Click Upload User Project to upload a custom user project to the touch screen. A Project Upload
dialog box opens.
Project Upload Dialog Box
NOTE: This selection is available only if the touch screen is running in user project mode.
To upload a custom user project:
1. Click Browse, and then navigate to the project .vtz file on the host computer.
2. Select the project .vtz file, and then click Open.
3. Click Load to load the project .vtz file to the touch screen. The upload progress is shown in
the dialog box.
4. Once the touch screen has completed the project upload, click OK.
Click the x button to close the Project Upload dialog box at any time during the upgrade process.
Clicking the x button before the project file is uploaded to the touch screen cancels the upload.
28 • TSW-560, TSW-760, and TSW-1060 Product Manual — Doc. 7927M