Network Proxy Settings - Crestron TSW-760 Product Manual

Crestron Fusion Cloud Settings
NOTE: If connecting to a Crestron Fusion® software on-premises server, connections are made
using either traditional (outbound) or inbound communications. For more information, refer to
the Crestron Fusion 10 On-Premises Software Getting Started
Crestron Fusion Cloud: Turn on the toggle to allow a connection to a Crestron Fusion
l
Cloud server. This connection is only applicable when the scheduling mode is set to
Crestron Default or User Project.
Crestron Fusion Cloud URL: Enter the URL used to connect the touch screen to the desired
l
Crestron Fusion Cloud server.

Network Proxy Settings

Click Network Proxy Settings to configure network proxy settings for the touch screen.
Settings Tab – Network Proxy Settings
Proxy: Turn on the toggle to configure the touch screen for use with a proxy server.
l
HTTP Settings
l
HTTP Proxy: Turn on the toggle to use an HTTP proxy server.
o
HTTP Proxy Address: Enter the IP address of the HTTP proxy server.
o
HTTP Proxy Port: Enter the port number of the HTTP proxy server.
o
Product Manual — Doc. 7927M
Guide.
TSW-560, TSW-760, and TSW-1060 • 39