Table of Contents
Advertisement
Warm button
This button is used to RAISE the temperature
setting. Press the button once to raise the
displayed temperature one degree. Holding the
button in will continuously increase the
temperature setting in one degree increments
until you either release it or 85˚F (29˚C) is
reached.
If the button is pressed after 85˚F (29˚C) is
reached, only 90˚F (32˚C) will be displayed and
the system will provide continuous maximum
heating.
System Operation
To heat the inside of your vehicle, turn the
SELECT knob to FLOOR and turn the FAN
knob to AUTO. The fan will remain off until the
engine reaches operating temperature or until
3-1/2 minutes have elapsed. As the interior of
your vehicle warms up, the discharge air
temperature and the fan speed will be
automatically and gradually changed to maintain
the set temperature. If you prefer a fixed fan
speed, turn the fan speed switch to the desired
setting.
To defrost the windshield and side windows,
turn the SELECT knob to Defrost V, turn the
FAN knob to HI and set the temperature as
necessary to clear the windshield.
To direct either cooled or heated air to the panel
registers and the floor at the same time, turn the
SELECT knob to PANEL & FLOOR, push the
COOL or WARM button for the desired
temperature and set the FAN speed as desired.
79
Hide quick links:
Advertisement
Table of Contents
