Ford 1996 Thunderbird Manual page 142

How to stop and restart the CD player
When a disc is loaded, the unit automatically
enters the play mode and the play indicator a
illuminates. To stop temporarily, press the
"PLAY/STOP" button or the "AM/FM" button.
The stop indicator X in the display illuminates
and operation returns to the radio mode. To
resume CD play, press the "PLAY/STOP"
button once again.
NOTE: If the ignition key is turned OFF
during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.
How to fast forward or reverse your CD
player
To quickly search for a particular point in a
selection, press the "FF" button (to fast forward)
or the "REV" button (to reverse). While either
button is pressed, the disc goes forward or
backward at two different speeds depending on
how long the button is held down. (Pressing
either button for more than approximately three
seconds will speed up the process.) Release the
button at the desired point (found by watching
the elapsed playing time in the display or by
listening to the sound during fast forward or
reverse). When you have reached the beginning
of track 1, the CD player will begin playing.
When you have reached the end of the disc by
keeping the fast forward button pressed, the
display will show "END" and the player will go
into pause mode. Push the "PLAY/STOP"
button to begin playing the first track of the
disc, press the "REV" button to back up from
the end of the disc, or use the "SEEK" function
to locate a desired track.
139